Guide to JCB Hydraulic Cylinder Resealing & Ram Maintenance
Boom drifting down on its own? Oil spraying from the cylinder gland? Here is how professional cylinder seal replacement restores full hydraulic power.

Internal Bypass vs External Gland Leakage
Hydraulic cylinder seal failure manifests in two ways: external leaks where oil escapes past the rod wiper onto the chrome shaft, and internal leaks where fluid bypasses the piston seal inside the cylinder barrel.
Internal bypass is often invisible from the outside, but it causes the boom, dipper, or stabilizer legs to slowly drift downward under load even when control levers are in neutral.
Steps in a Proper Workshop Cylinder Resealing
At RM Earth Movers, resealing is done systematically:
- Gland Removal: Using specialized pin spanners to loosen the gland nut without distorting the cylinder barrel.
- Piston Inspection: Checking the piston ring lands and wear bands for scoring.
- Rod Polishing: Removing micro-burrs and stone nicks from the hard chrome plating.
- Seal Kit Assembly: Installing new polyurethane U-cups, backup rings, and dual-lip wipers.
JCB Hydraulic Seal Change & Cylinder Resealing in Bagodar
Stop hydraulic cylinder leaks, pressure drops, and drifting booms with complete seal kit replacement and cylinder rod servicing.
Questions & Answers
JCB ka boom apne aap niche kyu girta hai?
Ye aam taur par boom cylinder ke internal piston seals ke wear hone se hota hai, jisse oil high-pressure side se low-pressure side me bypass ho jata hai. Seal change karwane se problem solve ho jati hai.
Need JCB, Hydraulic or Earth-Moving Work?
Speak directly with our technicians. No call centers, no waiting. Get part confirmation, repair advice, or machine booking in minutes.